Airfield Runway Fence And Turnstile

Airfield Runway Fences and Turnstile Installation in Jacksonville, Florida

Newsom Fence Company completed the installation of the airfield runway fence at Naval Air Station Mayport. This runway fence required break away posts to be installed. This required a coupling that the line posts screw into to allow the posts to break at the fitting if a certain amount of weight is applied to the fence/post. The fence is 7′ high plus 6 strands of barb wire onto. A couple of cantilever gates, including a double cantilever gate, were installed on this project. Newsom Fence installed a Boon Edam turnstile in the fence line as part of the project. Slats were installed on the bottom half of the fence to serve as a FOD preventer – the slats help to prevent debris from going through the fence and onto the airfield. Through the fence installers and the on site supervisor on the job, Newsom Fence Company was able to smoothly install the airfield runway fence, break away posts, gates, turnstile, and slats to make this airfield runway fence installation a success.
Share by: